CNC Vertical Machining Center

Feature:

The CNC Vertical machining center is at least three-axis and two-linkage, and generally can realize three-axis and three-linkage. Some can carry out five-axis, six-axis control. The height of the vertical machining center column is limited, and the processing range of the box type workpiece should be reduced, which is the disadvantage of the vertical machining center. However, the workpiece clamping and positioning of the vertical machining center are convenient; the movement trajectory of the cutting tool is easy to observe, the debugging program is convenient to check and measure, and the problem can be found in time, and the shutdown processing or modification can be carried out; the cooling condition is easy to establish, and the cutting fluid can directly reach the cutting tool and the machined surface; The three coordinate axes are consistent with the Cartesian coordinate system, and the intuitive feeling is consistent with the viewing angle of the pattern, and the chips are easy to remove and fall, so as to avoid scratching the processed surface. Compared with the corresponding horizontal machining center, the structure is simple, the floor area is small, and the price is lower. The vertical machining center is easy to install, easy to operate, easy to observe the processing situation, easy to debug the program, and widely used. However, due to the limitation of the height of the column and the tool changing device, parts that are too high cannot be machined. When machining a cavity or a concave surface, the chips are not easily discharged. In severe cases, the tool will be damaged, the machined surface will be damaged, and the smooth progress of the machining will be affected.

Function

The CNC Vertical machining center refers to the machining center whose main shaft is vertical. Its structure is mostly fixed column, the worktable is rectangular, and there is no indexing and rotating function. It is suitable for processing disc, sleeve and plate parts. It generally has three linear motions. Coordinate axis, and a rotary table that rotates along the horizontal axis can be installed on the worktable to process helical parts, mainly suitable for processing plates, discs, molds and small shells. The vertical machining center can complete the processes of milling, boring, drilling, tapping and thread cutting.

Parameter of CNC Vertical Machining Center